Pool Surround Resurfacing Brisbane | Non-Slip Finish Skip to content
Brisbane Concrete Resurfacing — BCR monogram BRISBANE CONCRETE
RESURFACING Concreting & decorative resurfacing · BSA 1109935 FREE QUOTE 0404 859 045
Pale sandy-grey non-slip decorative concrete pool surround with white grout lines beside a backyard pool
07 · Resurfacing · Greater Brisbane

POOL SURROUND RESURFACING

Non-slip when it is wet, cool under bare feet in January, and finished tight to the coping so there is nowhere for water to get underneath. A non-slip additive goes through the seal coat and the texture is chosen for skin, not shoes.

Lighter colours stay noticeably cooler through a Brisbane summer, so we will steer you away from the dark charcoal you saw on Pinterest unless you are happy to hop.

Speckled grey resurfaced concrete pool surround with fine joint lines wrapping a backyard pool
Non-slip pool surround — Cleveland
Grip
Non-slip additive
Underfoot
Cool-touch colours
Back in use
24 hours on foot

What you get

DONE PROPERLY, START TO FINISH

Pool surrounds are the hardest surface we do — constant water, sunscreen, chlorine and bare feet. They get the most careful edge detailing of any job on the list.

  • +Non-slip additive through the seal coat, not just a rough texture
  • +Cool-touch colour range for bare feet in summer
  • +Finished tight to coping and tile so water cannot track under
  • +Falls checked so puddles drain away from the pool
  • +Safe over existing pavers-look and stencilled surrounds

How the job runs

4 STAGES, WRITTEN INTO YOUR QUOTE

  1. 01

    Grind & prep

    Grind back the old surface, check falls, cut out cracks and mask the tiles.

  2. 02

    Repair to coping

    Rebuild damaged edges and seal the junction at the coping.

  3. 03

    Pattern & colour

    Overlay laid in the chosen pattern and cool-touch colour.

  4. 04

    Non-slip seal

    Two seal coats with non-slip additive, then a wet-foot test with you.

Finishes and patterns

REAL JOBS, REAL FINISHES

Grey speckled concrete pool surround cut into a square tile grid with dark grout, beside a blue pool
Tile-grid pool surround

Straight answers

POOL SURROUNDS QUESTIONS

The questions we get asked on the driveway about this one. Anything else, ring us — you will get a person.

ASK US — 0404 859 045

Is a resurfaced pool surround slippery when wet?

No. The non-slip additive goes through the seal coat and the texture is chosen for bare feet, so it grips wet. We wet it and walk it with you before we leave.

Will it get too hot for bare feet?

Not in the lighter colours, which is what we recommend around pools. Dark charcoals look sharp in photos and are punishing in a Brisbane January.

Will it lift where water sits?

Not if the edges are done properly. Failures around pools almost always start at the coping junction or an unsealed edge — that is where the care goes.

Related

OFTEN QUOTED TOGETHER

01

DECORATIVE CONCRETE RESURFACING

Spray-on & stencil over your slab

Read more + 09

CONCRETE SEALING & RE-SEALING

Two coats, every 3–5 years

Read more + 06

CRACKS, SPALLING & CONCRETE REPAIRS

Cut out, fix the cause, hide it

Read more + GUIDE

RESURFACING VS PAVERS

Why pavers move and overlays do not

Read the guide +

FREE ON-SITE QUOTE. NO OBLIGATION.

Tell us what you have got and we will come and measure it. You get a written, itemised price with a start date on it — not a number over the phone that changes when we turn up.